How to reset the Jawbone ERA

If your Jawbone ERA has become unresponsive, you may need to reset it.

To reset your Jawbone ERA, follow these steps:

1. Start with the AC adapter removed from any power source (unplug it from the wall socket).
2. Connect the Jawbone to the micro-USB end of the cable. The other end of the cable must be plugged in to the AC adapter.
3. Hold down the TALK button and then connect the AC adapter to a wall socket.
4. Once the AC adapter is plugged in to a power source, release the TALK button. You should see the RED LED flash on.

You have now reset your Jawbone ERA

Note: This soft reset is similar to rebooting your computer.